Capacity: ~200 g dry plant material
– working bag 220 μm
– filter bag 185 μm
– crystal catching bag 120 μm
– crystal catching bag 90 μm
– crystal catching bag 70 μm
– crystal catching bag 45 μm
– crystal catching bag 38 μm
– crystal catching bag 25 μm
Bag diameter: 30 cm
Working bag (220 μm) holds ~200 g dry plantmaterial
20 l/5 gal bucket required (not included)
This is the Small edition of our complete Ice-O-Lator® system, suitable for up to 200 grams of dried plant material.
The set includes a 220, 185, 120, 90, 70, 45, 38 and a 25 micron screen bag.
Consequently, this equipment will give you a maximum six degrees of quality/crystal size separation of your end product.
If you wish to explore the process of making Ice-O-Lator® to the fullest, this is the set for you!
With a choice from these screen sizes, you can perfectly adjust the set you are using to the specific requirements of your plant material.
Depending on the quality of your material, trichomes may be generally smaller or larger.
If your trichomes are overall rather large, you can separate qualities of bigger crystals (120, 90 & 70 μm).
Should your material have overall smaller crystals, you can separate qualities in the mini crystal ranges (45, 38 & 25 μm).
In case of small crystals you can furthermore use 185 μm and/or 120 μm as additional filters besides the 220 μm bag.
For additional information and instructions, please check our Manuals.
We offer an experimental Small 150 µm Bag. You can compile your own 8 Bag Set and substitute any of the above bags with a Small 150 µm bag.
Keep your water at or below 4°C (39.2°F), as it is the densest and therefore most effective in removing resin glands at this temperature.
You will achieve the absolute prime quality by slowly and carefully stirring.
As the quality of your product declines as the plantmaterial continues to be stirred, we recommend working your material in several rounds to obtain separate batches with a quality gradient.